CARBONX™ Carbon Fiber PETG Filament - Black various sizes

{"id":4700981362819,"title":"3DXSTAT ESD ABS Filament - Black various sizes","handle":"3dxstat-esd-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE ABS 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTarget surface resistance: 10^7 to 10^9 Ohm.  Compare to Stratasys® ABS-ESD7 in performance and price and you'll never go back!  M\u003cspan\u003eade using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade ESD-ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD ABS is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection and a high level of cleanliness.  Manufactured with consistency in mind - 3DXTech starts with premium ABS and then compounded according to a proprietary formulation of multi-wall carbon nanotubes - giving you a filament with excellent printing characteristics and consistent ESD properties.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD ABS:  \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method.\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-abs-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-abs-resistance.png\" alt=\"esd-abs-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220 - 240°C (desktop printers).  3DXSTAT™ ESD ABS is a filled product and has a higher melt viscosity vs. unfilled ABS.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Kapton Polyimide Tape, ABS\/Acetone Slurry \u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-03-26T17:10:18-04:00","created_at":"2020-03-26T17:10:18-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs esd","black","ESD","esd abs","Special ABS 1.75mm","Special ABS 3mm \/ 2.85mm"],"price":15400,"price_min":15400,"price_max":15400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858923958403,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-ABS-ESD-1.75-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":39743586435302,"product_id":4700981362819,"position":1,"created_at":"2023-08-08T23:24:34-04:00","updated_at":"2023-08-08T23:24:35-04:00","alt":"3DXSTAT ESD ABS Filament - Black various sizes Digitmakers.ca","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475","variant_ids":[32858923958403,32858923991171]},"available":true,"name":"3DXSTAT ESD ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":15400,"weight":1500,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"23958403","featured_media":{"alt":"3DXSTAT ESD ABS Filament - Black various sizes Digitmakers.ca","id":32347716616422,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858923991171,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DSTAT-FL-ABS-ESD-2.85-1kg-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":39743586435302,"product_id":4700981362819,"position":1,"created_at":"2023-08-08T23:24:34-04:00","updated_at":"2023-08-08T23:24:35-04:00","alt":"3DXSTAT ESD ABS Filament - Black various sizes Digitmakers.ca","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475","variant_ids":[32858923958403,32858923991171]},"available":true,"name":"3DXSTAT ESD ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":15400,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"23991171","featured_media":{"alt":"3DXSTAT ESD ABS Filament - Black various sizes Digitmakers.ca","id":32347716616422,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475","options":["Size","Color"],"media":[{"alt":"3DXSTAT ESD ABS Filament - Black various sizes Digitmakers.ca","id":32347716616422,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-ABS-Filament-Black-various-sizes-Digitmakers-ca-3203.jpg?v=1691551475","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE ABS 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTarget surface resistance: 10^7 to 10^9 Ohm.  Compare to Stratasys® ABS-ESD7 in performance and price and you'll never go back!  M\u003cspan\u003eade using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade ESD-ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD ABS is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection and a high level of cleanliness.  Manufactured with consistency in mind - 3DXTech starts with premium ABS and then compounded according to a proprietary formulation of multi-wall carbon nanotubes - giving you a filament with excellent printing characteristics and consistent ESD properties.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD ABS:  \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method.\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-abs-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-abs-resistance.png\" alt=\"esd-abs-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220 - 240°C (desktop printers).  3DXSTAT™ ESD ABS is a filled product and has a higher melt viscosity vs. unfilled ABS.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Kapton Polyimide Tape, ABS\/Acetone Slurry \u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":4701098508419,"title":"3DXSTAT ESD PETG Filament 750g Black","handle":"3dxstat-esd-petg-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-Safe PETG 3D FILAMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PETG is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.  Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003cspan\u003eat alternative to Zortrax Z-ESD.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNet Weight: 750g\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ ESD-PETG include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Chemical Resistance vs. ABS\u003c\/li\u003e\n\u003cli\u003eAmorphous:  Low and near isotropic shrinkage\u003c\/li\u003e\n\u003cli\u003eLow moisture absorption:  3X lower vs. ABS\u003c\/li\u003e\n\u003cli\u003eVery low odor emitted during printing\u003c\/li\u003e\n\u003cli\u003eSuperior ductility vs. ABS\u003c\/li\u003e\n\u003cli\u003eWide processing range:  230 - 260°C\u003c\/li\u003e\n\u003cli\u003eConsistent surface resistivity\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eChemical Resistance:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PETG: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.  \u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.  However, please do not exceed 270°C to reduce the risk of polymer degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-petg-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-petg-resistance.png\" alt=\"esd-petg-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  Ideally 230 to 260°C\u003c\/li\u003e\n\u003cli\u003ePlatform Temp:  60 to 90°C\u003c\/li\u003e\n\u003cli\u003ePlatform Prep:  Clean glass w\/ Kapton Tape, PVA-based glue, Hairspray  \u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-03-26T17:23:47-04:00","created_at":"2020-03-26T17:23:47-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxstat","3dxtech","3mm","750g","black","ESD","esd petg","PETG","PETG 1.75mm","PETG 3mm \/ 2.85mm","petg esd","PETG filaments"],"price":12495,"price_min":12495,"price_max":12495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32859164180611,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"3DSTAT-FL-PETG-ESD-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":39743586500838,"product_id":4701098508419,"position":1,"created_at":"2023-08-08T23:24:37-04:00","updated_at":"2023-08-08T23:24:38-04:00","alt":"3DXSTAT ESD PETG Filament 750g Black Digitmakers.ca","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PETG-Filament-750g-Black-Digitmakers-ca-1471.jpg?v=1691551478","variant_ids":[32859164180611]},"available":false,"name":"3DXSTAT ESD PETG Filament 750g Black - Black","public_title":"Black","options":["Black"],"price":12495,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"64180611","featured_media":{"alt":"3DXSTAT ESD PETG Filament 750g Black Digitmakers.ca","id":32347716649190,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PETG-Filament-750g-Black-Digitmakers-ca-1471.jpg?v=1691551478"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PETG-Filament-750g-Black-Digitmakers-ca-1471.jpg?v=1691551478"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PETG-Filament-750g-Black-Digitmakers-ca-1471.jpg?v=1691551478","options":["Color"],"media":[{"alt":"3DXSTAT ESD PETG Filament 750g Black Digitmakers.ca","id":32347716649190,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PETG-Filament-750g-Black-Digitmakers-ca-1471.jpg?v=1691551478"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PETG-Filament-750g-Black-Digitmakers-ca-1471.jpg?v=1691551478","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-Safe PETG 3D FILAMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PETG is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.  Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003cspan\u003eat alternative to Zortrax Z-ESD.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNet Weight: 750g\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ ESD-PETG include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Chemical Resistance vs. ABS\u003c\/li\u003e\n\u003cli\u003eAmorphous:  Low and near isotropic shrinkage\u003c\/li\u003e\n\u003cli\u003eLow moisture absorption:  3X lower vs. ABS\u003c\/li\u003e\n\u003cli\u003eVery low odor emitted during printing\u003c\/li\u003e\n\u003cli\u003eSuperior ductility vs. ABS\u003c\/li\u003e\n\u003cli\u003eWide processing range:  230 - 260°C\u003c\/li\u003e\n\u003cli\u003eConsistent surface resistivity\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eChemical Resistance:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Conveying, Metering, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PETG: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.  \u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application.  However, please do not exceed 270°C to reduce the risk of polymer degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-petg-resistance.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-petg-resistance.png\" alt=\"esd-petg-resistance.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  Ideally 230 to 260°C\u003c\/li\u003e\n\u003cli\u003ePlatform Temp:  60 to 90°C\u003c\/li\u003e\n\u003cli\u003ePlatform Prep:  Clean glass w\/ Kapton Tape, PVA-based glue, Hairspray  \u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":4700933357699,"title":"3DXSTAT ESD PLA Filament 750g Black","handle":"3dxstat-esd-pla-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE PLA 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PLA is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.   Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003c\/p\u003e\n\u003cp\u003eNet Weight: 750g\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for printing without a heated bed - no enclosure required\u003c\/li\u003e\n\u003cli\u003eLow shrink \/ warp - very easy to print\u003c\/li\u003e\n\u003cli\u003eLow odor - ideal for printing in public spaces \/ office environments\u003c\/li\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Housings, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Fixtures, Conveying, Metering, End-of-arm Tooling, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PLA:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpec:  10^6 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method, target 10^7 Ohm\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-pla-ultem-resistance-1.original.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-pla-ultem-resistance-1.original.png\" alt=\"esd-pla-ultem-resistance-1.original.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder Temp:  Typically 210-220°C.  3DXSTAT™ ESD PLA is a filled product and has a higher melt viscosity vs. unfilled PLA.  Therefore, it is sometimes necessary to print at higher temperatures than your standard PLA to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eExtrusion Multiplier:  1.15 - 1.20\u003c\/li\u003e\n\u003cli\u003eExtrusion Speed:  60mm\/s or higher\u003c\/li\u003e\n\u003cli\u003eBed Temp:  23-60°C\u003c\/li\u003e\n\u003cli\u003eFan Speed:  50-100% starting on 2nd layer\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Blue Tape, Hairspray on clean glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T17:04:51-04:00","created_at":"2020-03-26T17:04:51-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","black","ESD","esd pla","esd pla filament","Special PLA 1.75mm","Special PLA 3mm \/ 2.85mm"],"price":12495,"price_min":12495,"price_max":12495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858809270403,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"3DSTAT-FL-PLA-ESD-1.75-750G-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":39743588729062,"product_id":4700933357699,"position":1,"created_at":"2023-08-08T23:35:24-04:00","updated_at":"2023-08-08T23:35:25-04:00","alt":"3DXSTAT ESD PLA Filament 750g Black Digitmakers.ca","width":416,"height":420,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PLA-Filament-750g-Black-Digitmakers-ca-3599.jpg?v=1691552125","variant_ids":[32858809270403]},"available":true,"name":"3DXSTAT ESD PLA Filament 750g Black - Black","public_title":"Black","options":["Black"],"price":12495,"weight":1500,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"09270403","featured_media":{"alt":"3DXSTAT ESD PLA Filament 750g Black Digitmakers.ca","id":32347719532774,"position":1,"preview_image":{"aspect_ratio":0.99,"height":420,"width":416,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PLA-Filament-750g-Black-Digitmakers-ca-3599.jpg?v=1691552125"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PLA-Filament-750g-Black-Digitmakers-ca-3599.jpg?v=1691552125"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PLA-Filament-750g-Black-Digitmakers-ca-3599.jpg?v=1691552125","options":["Color"],"media":[{"alt":"3DXSTAT ESD PLA Filament 750g Black Digitmakers.ca","id":32347719532774,"position":1,"preview_image":{"aspect_ratio":0.99,"height":420,"width":416,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PLA-Filament-750g-Black-Digitmakers-ca-3599.jpg?v=1691552125"},"aspect_ratio":0.99,"height":420,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXSTAT-ESD-PLA-Filament-750g-Black-Digitmakers-ca-3599.jpg?v=1691552125","width":416}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXSTAT™ ESD-SAFE PLA 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3DXSTAT™ ESD PLA is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.   Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.\u003c\/p\u003e\n\u003cp\u003eNet Weight: 750g\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of 3DXSTAT™ include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for printing without a heated bed - no enclosure required\u003c\/li\u003e\n\u003cli\u003eLow shrink \/ warp - very easy to print\u003c\/li\u003e\n\u003cli\u003eLow odor - ideal for printing in public spaces \/ office environments\u003c\/li\u003e\n\u003cli\u003eConsistent and reliable surface resistance\u003c\/li\u003e\n\u003cli\u003eImproved retention of impact \u0026amp; elongation vs. similiar ESD-safe materials\u003c\/li\u003e\n\u003cli\u003eLow particulate contamination\u003c\/li\u003e\n\u003cli\u003eMinimal contribution to outgassing and ionic contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTypical applications include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-con:  HDD Components, Housings, Wafer Handling, Jigs, Casings, \u0026amp; Connectors \u003c\/li\u003e\n\u003cli\u003eIndustrial:  Fixtures, Conveying, Metering, End-of-arm Tooling, and Sensing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTarget conductivity for 3DXSTAT™ ESD PLA:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpec:  10^6 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method, target 10^7 Ohm\u003c\/li\u003e\n\u003cli\u003eNote:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer \/ application. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eSurface conductivity as a function of extruder temperature:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"esd-pla-ultem-resistance-1.original.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-4b4qda9b\/product_images\/uploaded_images\/esd-pla-ultem-resistance-1.original.png\" alt=\"esd-pla-ultem-resistance-1.original.png\" width=\"400\" height=\"279\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface resistance of the printed ESD-safe part will vary depending on the printer's extruder temperature.  For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity.  Therefore, the surface resistance can be 'dialed-in' by adjusting the extruder temperature up or down depending on the reading you receive on your part.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended Print Conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder Temp:  Typically 210-220°C.  3DXSTAT™ ESD PLA is a filled product and has a higher melt viscosity vs. unfilled PLA.  Therefore, it is sometimes necessary to print at higher temperatures than your standard PLA to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eExtrusion Multiplier:  1.15 - 1.20\u003c\/li\u003e\n\u003cli\u003eExtrusion Speed:  60mm\/s or higher\u003c\/li\u003e\n\u003cli\u003eBed Temp:  23-60°C\u003c\/li\u003e\n\u003cli\u003eFan Speed:  50-100% starting on 2nd layer\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Blue Tape, Hairspray on clean glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

{"id":15757148171,"title":"Breathe-3dp Zenith Copolyester 2.85mm 1kg Black","handle":"zenith-copolyester-2-85mm-3d-printer-filament","description":"\u003cp\u003eZenith Strong Copolyester is great filament for many application where hardness and thermal resistance is required \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 kg  Net of material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications : \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Zenith_TDS.pdf?7868413158838333305\"\u003ePhysical Property Data Sheet  \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eNozzle Temp.: 225-250 c \u003c\/li\u003e\n\u003cli\u003eHeated Bed: 80-90 c \u003c\/li\u003e\n\u003cli\u003eSpeed : 30 -90 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Fan: 30%\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:29:12-05:00","created_at":"2017-10-26T16:41:38-04:00","vendor":"BREATHE3DP","type":"Filaments","tags":["2.85mm","3D Printer Filament","3mm","Black","Business","Clear","clearance","clearance filament","Copolyester","Filament","PETG 3mm \/ 2.85mm"],"price":4999,"price_min":4999,"price_max":4999,"available":true,"price_varies":false,"compare_at_price":5999,"compare_at_price_min":5999,"compare_at_price_max":5999,"compare_at_price_varies":false,"variants":[{"id":71170785291,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FL0013-3DP-Black-2.85","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Breathe-3dp Zenith Copolyester 2.85mm 1kg Black","public_title":null,"options":["Default Title"],"price":4999,"weight":1500,"compare_at_price":5999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000870","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/ph_Black_1400x_0e8ab2fe-271d-4512-85ea-53949370d8c4.jpg?v=1613452962"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/ph_Black_1400x_0e8ab2fe-271d-4512-85ea-53949370d8c4.jpg?v=1613452962","options":["Title"],"media":[{"alt":"Breathe-3dp Zenith Copolyester 2.85mm 1kg Black - Digitmakers.ca","id":399612903555,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/ph_Black_1400x_0e8ab2fe-271d-4512-85ea-53949370d8c4.jpg?v=1613452962"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/ph_Black_1400x_0e8ab2fe-271d-4512-85ea-53949370d8c4.jpg?v=1613452962","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eZenith Strong Copolyester is great filament for many application where hardness and thermal resistance is required \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 kg  Net of material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications : \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Zenith_TDS.pdf?7868413158838333305\"\u003ePhysical Property Data Sheet  \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eNozzle Temp.: 225-250 c \u003c\/li\u003e\n\u003cli\u003eHeated Bed: 80-90 c \u003c\/li\u003e\n\u003cli\u003eSpeed : 30 -90 mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling Fan: 30%\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":4700657451139,"title":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF grades are abrasive and will quickly wear out a brass nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220-240°C.  CarbonX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Kapton Tape, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We currently recommend minimum 0.4mm orifice. \u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:25:57-04:00","created_at":"2020-03-26T16:25:57-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs carbon fiber","ABS Filament","black","Carbon Fiber","carbon fiber filament","carbonx","cf","Fiber Reinforced","Special ABS 1.75mm","Special ABS 3mm \/ 2.85mm"],"price":7595,"price_min":7595,"price_max":7595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32857993969795,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-ABS-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962625151107,"product_id":4700657451139,"position":1,"created_at":"2020-03-26T16:29:35-04:00","updated_at":"2020-07-11T07:49:21-04:00","alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","variant_ids":[32857993969795,32857994002563]},"available":true,"name":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93969795","featured_media":{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132511273091,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32857994002563,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-ABS-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962625151107,"product_id":4700657451139,"position":1,"created_at":"2020-03-26T16:29:35-04:00","updated_at":"2020-07-11T07:49:21-04:00","alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","variant_ids":[32857993969795,32857994002563]},"available":true,"name":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"94002563","featured_media":{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132511273091,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","\/\/www.digitmakers.ca\/cdn\/shop\/products\/Carbon_Fiber_Rocket__25420.1438597211.jpg?v=1594468161"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132511273091,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-ABS_175_750g__46307.1551980707.jpg?v=1594468161","width":1269},{"alt":"CARBONX™ Carbon Fiber ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132531654787,"position":2,"preview_image":{"aspect_ratio":0.664,"height":1280,"width":850,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Carbon_Fiber_Rocket__25420.1438597211.jpg?v=1594468161"},"aspect_ratio":0.664,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Carbon_Fiber_Rocket__25420.1438597211.jpg?v=1594468161","width":850}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF grades are abrasive and will quickly wear out a brass nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  220-240°C.  CarbonX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-110°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Kapton Tape, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We currently recommend minimum 0.4mm orifice. \u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

{"id":4700847112323,"title":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - 2.85mm, Black","handle":"3dxtech-carbonx-carbon-fiber-nylon-gen-3-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eGen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing.  Tired of nylon that warps?  This is the answer you've been looking for.  Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fiber Printer:  \u003c\/strong\u003ePrint industrial-grade CF-NYLON parts with Gearbox™ HT2 High-Temp 3D Printer.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Performance + High Temp Resistance: \u003c\/strong\u003e Gen3 CarbonX™ CF-Nylon is a PA6 copolymer made using high-modulus carbon fiber and state-of-the-art compounding and extrusion technology.  Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  240-270°C.  CarbonX™ CFR Nylon exhibits improved layer bonding at higher temperatures.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  80 - 100°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Polyimide Tape, Clean glass with ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eHardened Nozzle: 0.4mm or larger.  We strongly recommend our A2 Hardened Steel Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:54:21-04:00","created_at":"2020-03-26T16:54:21-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs cf","black","cafbon fiber nylon","Carbon Fiber","carbon fiber filament","carbonx","cf","cf nylon","cf pc","Fiber Reinforced","Nylon 1.75 mm","Nylon 1.75mm","Nylon 3 mm \/ 2.85 mm","nylon carbon fiber","nylon cf","nylon filament","pc cf","Polycarbonate 1.75mm","Polycarbonate 2.85 mm"],"price":8995,"price_min":8995,"price_max":8995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858610630787,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-NYL-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14963022069891,"product_id":4700847112323,"position":1,"created_at":"2020-03-26T16:56:28-04:00","updated_at":"2020-07-11T07:49:24-04:00","alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164","variant_ids":[32858610630787]},"available":true,"name":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - 2.85mm, Black - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":8995,"weight":1500,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10630787","featured_media":{"alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132908781699,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber Nylon (Gen 3) Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132908781699,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-Nylon_175_750g__98809.1551884281.jpg?v=1594468164","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eGen3 CarbonX™ Carbon Fiber Reinforced Nylon 3D Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing.  Tired of nylon that warps?  This is the answer you've been looking for.  Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Fiber Printer:  \u003c\/strong\u003ePrint industrial-grade CF-NYLON parts with Gearbox™ HT2 High-Temp 3D Printer.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Performance + High Temp Resistance: \u003c\/strong\u003e Gen3 CarbonX™ CF-Nylon is a PA6 copolymer made using high-modulus carbon fiber and state-of-the-art compounding and extrusion technology.  Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  240-270°C.  CarbonX™ CFR Nylon exhibits improved layer bonding at higher temperatures.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  80 - 100°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  Polyimide Tape, Clean glass with ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eHardened Nozzle: 0.4mm or larger.  We strongly recommend our A2 Hardened Steel Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

{"id":4700755853443,"title":"CARBONX™ Carbon Fiber PC Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-pc-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.  Polycarbonate has a Tg of 147°C and offers some of the highest thermal performance on the 3D market.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber PC parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-310°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  110-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:42:55-04:00","created_at":"2020-03-26T16:42:55-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","black","Carbon Fiber","carbon fiber filament","carbonx","cf","cf pc","Fiber Reinforced","pc cf","Polycarbonate 1.75mm","Polycarbonate 2.85 mm"],"price":11495,"price_min":11495,"price_max":11495,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858361823363,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962845515907,"product_id":4700755853443,"position":1,"created_at":"2020-03-26T16:43:45-04:00","updated_at":"2020-07-11T07:49:22-04:00","alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","variant_ids":[32858361823363,32858361856131]},"available":false,"name":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":11495,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"61823363","featured_media":{"alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132731637891,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858361856131,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962845515907,"product_id":4700755853443,"position":1,"created_at":"2020-03-26T16:43:45-04:00","updated_at":"2020-07-11T07:49:22-04:00","alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","variant_ids":[32858361823363,32858361856131]},"available":false,"name":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":11495,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"61856131","featured_media":{"alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132731637891,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber PC Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132731637891,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC_175_750g__53266.1553083206.jpg?v=1594468162","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability.  Polycarbonate has a Tg of 147°C and offers some of the highest thermal performance on the 3D market.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint industrial-grade Carbon Fiber PC parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-310°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  110-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

{"id":4700790325379,"title":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-pc-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced PC\/ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC\/ABS has been formulated to offer improved thermal resistance and mechanical properties while retaining an ease of printability that makes it ideal for anyone seeking a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. \u003c\/p\u003e\n\u003cp\u003ePrint industrial-grade Carbon Fiber PC\/ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-300°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzle\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T16:47:32-04:00","created_at":"2020-03-26T16:47:32-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","abs cf","black","Carbon Fiber","carbon fiber filament","carbonx","cf","cf abs","cf pc","Fiber Reinforced","pc abs","pc cf","pcabs","Polycarbonate 1.75mm","Polycarbonate 2.85 mm","Special ABS 1.75mm","Special ABS 3mm \/ 2.85mm"],"price":8995,"price_min":8995,"price_max":8995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32858460356739,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-ABS-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962951127171,"product_id":4700790325379,"position":1,"created_at":"2020-03-26T16:51:03-04:00","updated_at":"2020-07-11T07:49:23-04:00","alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","variant_ids":[32858460356739,32858460389507]},"available":false,"name":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":8995,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"60356739","featured_media":{"alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132837478531,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32858460389507,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PC-ABS-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14962951127171,"product_id":4700790325379,"position":1,"created_at":"2020-03-26T16:51:03-04:00","updated_at":"2020-07-11T07:49:23-04:00","alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","variant_ids":[32858460356739,32858460389507]},"available":true,"name":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":8995,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"60389507","featured_media":{"alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132837478531,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber PC\/ABS Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7132837478531,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PC-ABS_175_750g__43579.1566221329.jpg?v=1594468163","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eCarbonX™ Carbon Fiber Reinforced PC\/ABS Filament\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CF-PC\/ABS has been formulated to offer improved thermal resistance and mechanical properties while retaining an ease of printability that makes it ideal for anyone seeking a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. \u003c\/p\u003e\n\u003cp\u003ePrint industrial-grade Carbon Fiber PC\/ABS parts with Gearbox™ HT2 High-Temp 3D Printer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  280-300°C\u003c\/li\u003e\n\u003cli\u003eBed Temp:  100-120°C\u003c\/li\u003e\n\u003cli\u003eBed Prep:  PEI Sheet or tape, Kapton\/PI Tape, Glue stick on clean glass, ABS\/Acetone Slurry\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzle\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

{"id":4700363915395,"title":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes","handle":"3dxtech-carbonx-carbon-fiber-pla-filament-black","description":"\u003ch1 class=\"product-header\"\u003e\n\u003cstrong\u003eCarbonX™ CFR Carbon Fiber Reinforced PLA Filament\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eCarbonX™ CFR-PLA is an improved CF reinforced 3D printing filament vs. the competition.  Made using High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made in the USA using premium Natureworks PLA and high modulus carbon fiber.  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNO heated bed required!  \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CFR PLA is suitable for use in practically any desktop 3D Printer.  Please note - carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  190-220°C.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  23 - 60°C  (Heated bed NOT necessary)  \u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Blue Painters Tape, PVA-based Glue, Hairspray on clean glass\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2020-03-26T15:14:31-04:00","created_at":"2020-03-26T15:35:00-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","2.85mm","3dxtech","3mm","750g","black","Carbon Fiber","carbon fiber filament","carbonx","cf","Fiber Reinforced","pla cf","Special PLA 1.75mm","Special PLA 3mm \/ 2.85mm"],"price":7595,"price_min":7595,"price_max":7595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32856696094851,"title":"1.75mm \/ Black","option1":"1.75mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PLA-CF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14961747329155,"product_id":4700363915395,"position":1,"created_at":"2020-03-26T15:35:02-04:00","updated_at":"2020-07-11T07:49:20-04:00","alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","variant_ids":[32856696094851,32856696127619]},"available":true,"name":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - 1.75mm \/ Black","public_title":"1.75mm \/ Black","options":["1.75mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"96094851","featured_media":{"alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7131632795779,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32856696127619,"title":"2.85mm \/ Black","option1":"2.85mm","option2":"Black","option3":null,"sku":"3DXTECH-FL-PLA-CF-2.85-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14961747329155,"product_id":4700363915395,"position":1,"created_at":"2020-03-26T15:35:02-04:00","updated_at":"2020-07-11T07:49:20-04:00","alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","variant_ids":[32856696094851,32856696127619]},"available":false,"name":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - 2.85mm \/ Black","public_title":"2.85mm \/ Black","options":["2.85mm","Black"],"price":7595,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"96127619","featured_media":{"alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7131632795779,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","options":["Size","Color"],"media":[{"alt":"CARBONX™ Carbon Fiber PLA Filament - Black various sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":7131632795779,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/CF-PLA_175_750g__60142.1551980769.jpg?v=1594468160","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"product-header\"\u003e\n\u003cstrong\u003eCarbonX™ CFR Carbon Fiber Reinforced PLA Filament\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eCarbonX™ CFR-PLA is an improved CF reinforced 3D printing filament vs. the competition.  Made using High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made in the USA using premium Natureworks PLA and high modulus carbon fiber.  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNO heated bed required!  \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eCarbonX™ CFR PLA is suitable for use in practically any desktop 3D Printer.  Please note - carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtruder:  190-220°C.  \u003c\/li\u003e\n\u003cli\u003eBed Temp:  23 - 60°C  (Heated bed NOT necessary)  \u003c\/li\u003e\n\u003cli\u003eBed Prep:  3DXTech Blue Painters Tape, PVA-based Glue, Hairspray on clean glass\u003c\/li\u003e\n\u003cli\u003eNozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles\u003c\/li\u003e\n\u003cli\u003eLayer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

{"id":8058617483,"title":"eSUN ABS+ Filament 2.85 mm 1kg Spool Various Colors","handle":"esun-abs-filaments-various-colors-2-85mm","description":"\u003cp\u003eDigitMakers ABS+ filament Provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess warping.\u003c\/li\u003e\n\u003cli\u003eLower extrusion temperature.\u003c\/li\u003e\n\u003cli\u003eImproved build plate adhesion.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaterial is guaranteed free from common issues such as bubbles, concave\/convex dot, and dirt.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAlthough smoke and odor levels are low, \u003cem\u003eABS filaments must be used in well-ventilated area.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal series ABS (Acrylonitrile Butadiene Styrene) thermoplastic filament is a premium grade material that is well-suited for higher detailed and structurally demanding 3D prints. It is strong, durable and can be used conjointly with our \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-water-soluble-pva-filament-1-75-mm-0-5-kg\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/esun-water-soluble-pva-filament-1-75-mm-0-5-kg\"\u003edissolvable filament\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFILAMENT DIAMETER: \u003c\/strong\u003e3.00 MM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL DIAMETER: \u003c\/strong\u003e20 CM (7.87 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL WIDTH: \u003c\/strong\u003e6.2 CM (2.44 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL HUB HOLE: \u003c\/strong\u003e5.5 CM (2.16 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINNER COIL DIAMETER: \u003c\/strong\u003e9 CM (3.54 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMATERIAL GRADE: \u003c\/strong\u003eA – 100% VIRGIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVACUUM PACKED: \u003c\/strong\u003eYES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDESICCANT: \u003c\/strong\u003eINCLUDED\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTEMPERATURE: 220 -260\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e1 KG (2.2 LB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHIPPING WEIGHT: 1.33\u003c\/strong\u003e KG\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:27:37-05:00","created_at":"2017-01-29T12:27:37-05:00","vendor":"ESUN","type":"Filaments","tags":["2.85mm","3 mm","3mm","abs+ filament","BlackFriday","esun","esun abs+","hobby","Special ABS 3mm \/ 2.85mm"],"price":2349,"price_min":2349,"price_max":2349,"available":false,"price_varies":false,"compare_at_price":3800,"compare_at_price_min":3800,"compare_at_price_max":3800,"compare_at_price_varies":false,"variants":[{"id":32828705276035,"title":"2.85 \/ Black","option1":"2.85","option2":"Black","option3":null,"sku":"ESUN-FL-ABS+-2.85-1KG-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":14936419598467,"product_id":8058617483,"position":4,"created_at":"2020-03-25T12:02:59-04:00","updated_at":"2021-02-16T00:21:46-05:00","alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","width":2100,"height":1500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Black_98eaef9e-cf67-42a1-a442-ff69a296574c.jpg?v=1613452906","variant_ids":[32828705276035]},"available":false,"name":"eSUN ABS+ Filament 2.85 mm 1kg Spool Various Colors - 2.85 \/ Black","public_title":"2.85 \/ Black","options":["2.85","Black"],"price":2349,"weight":1500,"compare_at_price":3800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"05276035","featured_media":{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106284847235,"position":4,"preview_image":{"aspect_ratio":1.4,"height":1500,"width":2100,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Black_98eaef9e-cf67-42a1-a442-ff69a296574c.jpg?v=1613452906"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32828705243267,"title":"2.85 \/ Blue","option1":"2.85","option2":"Blue","option3":null,"sku":"ESUN-FL-ABS+-2.85-1KG-BLU","requires_shipping":true,"taxable":true,"featured_image":{"id":16467636107,"product_id":8058617483,"position":2,"created_at":"2017-01-29T12:27:37-05:00","updated_at":"2021-02-16T00:21:46-05:00","alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","width":500,"height":380,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-blue_dce8b730-f2da-42da-ba9c-b3ffd1970f0f.jpg?v=1613452906","variant_ids":[32828705243267]},"available":false,"name":"eSUN ABS+ Filament 2.85 mm 1kg Spool Various Colors - 2.85 \/ Blue","public_title":"2.85 \/ Blue","options":["2.85","Blue"],"price":2349,"weight":1500,"compare_at_price":3800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572230040","featured_media":{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":94741889060,"position":2,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-blue_dce8b730-f2da-42da-ba9c-b3ffd1970f0f.jpg?v=1613452906"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32828705341571,"title":"2.85 \/ Grey","option1":"2.85","option2":"Grey","option3":null,"sku":"ESUN-FL-ABS+-2.85-1KG-GRY","requires_shipping":true,"taxable":true,"featured_image":{"id":14936421761155,"product_id":8058617483,"position":6,"created_at":"2020-03-25T12:03:04-04:00","updated_at":"2021-02-16T00:21:47-05:00","alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","width":2100,"height":1500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Gray_5a6f6163-2e27-4fa3-8922-f8165a4c41e1.jpg?v=1613452907","variant_ids":[32828705341571]},"available":false,"name":"eSUN ABS+ Filament 2.85 mm 1kg Spool Various Colors - 2.85 \/ Grey","public_title":"2.85 \/ Grey","options":["2.85","Grey"],"price":2349,"weight":1500,"compare_at_price":3800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"05341571","featured_media":{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106286354563,"position":6,"preview_image":{"aspect_ratio":1.4,"height":1500,"width":2100,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Gray_5a6f6163-2e27-4fa3-8922-f8165a4c41e1.jpg?v=1613452907"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32828705308803,"title":"2.85 \/ Red","option1":"2.85","option2":"Red","option3":null,"sku":"ESUN-FL-ABS+-2.85-1KG-RED","requires_shipping":true,"taxable":true,"featured_image":{"id":14936318476419,"product_id":8058617483,"position":3,"created_at":"2020-03-25T11:54:54-04:00","updated_at":"2021-02-16T00:21:46-05:00","alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","width":640,"height":480,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-pla-red_4084566a-7062-4c18-908a-ff9683b135ad.jpg?v=1613452906","variant_ids":[32828705308803]},"available":false,"name":"eSUN ABS+ Filament 2.85 mm 1kg Spool Various Colors - 2.85 \/ Red","public_title":"2.85 \/ Red","options":["2.85","Red"],"price":2349,"weight":1500,"compare_at_price":3800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"05308803","featured_media":{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106183594115,"position":3,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-pla-red_4084566a-7062-4c18-908a-ff9683b135ad.jpg?v=1613452906"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32828705374339,"title":"2.85 \/ White","option1":"2.85","option2":"White","option3":null,"sku":"ESUN-FL-ABS+-2.85-1KG-WHT","requires_shipping":true,"taxable":true,"featured_image":{"id":14936420450435,"product_id":8058617483,"position":5,"created_at":"2020-03-25T12:03:02-04:00","updated_at":"2021-02-16T00:21:46-05:00","alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","width":2100,"height":1500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_white_bfc63c37-944c-496e-ace3-b1cbda98a51b.jpg?v=1613452906","variant_ids":[32828705374339]},"available":false,"name":"eSUN ABS+ Filament 2.85 mm 1kg Spool Various Colors - 2.85 \/ White","public_title":"2.85 \/ White","options":["2.85","White"],"price":2349,"weight":1500,"compare_at_price":3800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6922572230033","featured_media":{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106285469827,"position":5,"preview_image":{"aspect_ratio":1.4,"height":1500,"width":2100,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_white_bfc63c37-944c-496e-ace3-b1cbda98a51b.jpg?v=1613452906"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/eSun-ABS_-2.85mm.jpg?v=1613452906","\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-blue_dce8b730-f2da-42da-ba9c-b3ffd1970f0f.jpg?v=1613452906","\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-pla-red_4084566a-7062-4c18-908a-ff9683b135ad.jpg?v=1613452906","\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Black_98eaef9e-cf67-42a1-a442-ff69a296574c.jpg?v=1613452906","\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_white_bfc63c37-944c-496e-ace3-b1cbda98a51b.jpg?v=1613452906","\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Gray_5a6f6163-2e27-4fa3-8922-f8165a4c41e1.jpg?v=1613452907"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/eSun-ABS_-2.85mm.jpg?v=1613452906","options":["Size","Color"],"media":[{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":13234434048162,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/eSun-ABS_-2.85mm.jpg?v=1613452906"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/eSun-ABS_-2.85mm.jpg?v=1613452906","width":1000},{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":94741889060,"position":2,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-blue_dce8b730-f2da-42da-ba9c-b3ffd1970f0f.jpg?v=1613452906"},"aspect_ratio":1.316,"height":380,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-blue_dce8b730-f2da-42da-ba9c-b3ffd1970f0f.jpg?v=1613452906","width":500},{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106183594115,"position":3,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-pla-red_4084566a-7062-4c18-908a-ff9683b135ad.jpg?v=1613452906"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs-pla-red_4084566a-7062-4c18-908a-ff9683b135ad.jpg?v=1613452906","width":640},{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106284847235,"position":4,"preview_image":{"aspect_ratio":1.4,"height":1500,"width":2100,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Black_98eaef9e-cf67-42a1-a442-ff69a296574c.jpg?v=1613452906"},"aspect_ratio":1.4,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Black_98eaef9e-cf67-42a1-a442-ff69a296574c.jpg?v=1613452906","width":2100},{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106285469827,"position":5,"preview_image":{"aspect_ratio":1.4,"height":1500,"width":2100,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_white_bfc63c37-944c-496e-ace3-b1cbda98a51b.jpg?v=1613452906"},"aspect_ratio":1.4,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_white_bfc63c37-944c-496e-ace3-b1cbda98a51b.jpg?v=1613452906","width":2100},{"alt":"ESun ABS+ Filament 2.85 mm 1kg Spool Various Colors - Digitmakers.ca","id":7106286354563,"position":6,"preview_image":{"aspect_ratio":1.4,"height":1500,"width":2100,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Gray_5a6f6163-2e27-4fa3-8922-f8165a4c41e1.jpg?v=1613452907"},"aspect_ratio":1.4,"height":1500,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/abs_Gray_5a6f6163-2e27-4fa3-8922-f8165a4c41e1.jpg?v=1613452907","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDigitMakers ABS+ filament Provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess warping.\u003c\/li\u003e\n\u003cli\u003eLower extrusion temperature.\u003c\/li\u003e\n\u003cli\u003eImproved build plate adhesion.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaterial is guaranteed free from common issues such as bubbles, concave\/convex dot, and dirt.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAlthough smoke and odor levels are low, \u003cem\u003eABS filaments must be used in well-ventilated area.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal series ABS (Acrylonitrile Butadiene Styrene) thermoplastic filament is a premium grade material that is well-suited for higher detailed and structurally demanding 3D prints. It is strong, durable and can be used conjointly with our \u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-water-soluble-pva-filament-1-75-mm-0-5-kg\" data-mce-href=\"https:\/\/www.digitmakers.ca\/products\/esun-water-soluble-pva-filament-1-75-mm-0-5-kg\"\u003edissolvable filament\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFILAMENT DIAMETER: \u003c\/strong\u003e3.00 MM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL DIAMETER: \u003c\/strong\u003e20 CM (7.87 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL WIDTH: \u003c\/strong\u003e6.2 CM (2.44 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPOOL HUB HOLE: \u003c\/strong\u003e5.5 CM (2.16 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINNER COIL DIAMETER: \u003c\/strong\u003e9 CM (3.54 IN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMATERIAL GRADE: \u003c\/strong\u003eA – 100% VIRGIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVACUUM PACKED: \u003c\/strong\u003eYES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDESICCANT: \u003c\/strong\u003eINCLUDED\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTEMPERATURE: 220 -260\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNET WEIGHT: \u003c\/strong\u003e1 KG (2.2 LB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHIPPING WEIGHT: 1.33\u003c\/strong\u003e KG\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":4701190586499,"title":"Fibrex ABS+GF Filament - 1.75mm 1kg Black","handle":"3dxmax-gf10-abs-filament-black-various-sizes","description":"\u003cp\u003e\u003cstrong\u003e3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM\/FFF process.  Glass fiber is very abrasive and we strongly recommend using our A2 Hardened Steel Nozzles when printing with glass fiber reinforced materials.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint industrial-grade ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Attributes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for structural engineering-grade applications\u003c\/li\u003e\n\u003cli\u003eExceptionally stiff and strong - without being brittle\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage, warp, and lifting\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties - up to 95\u003cspan\u003e°C\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ein-use applications depending on the mechanical loads applied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eExtruder:\u003c\/span\u003e  230-245°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Temp:\u003c\/span\u003e  95-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Prep: \u003c\/span\u003e PI Tape, PEI Tape, or ABS\/Acetone Slurry on clean glass works great for us.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHardened Nozzle:\u003c\/span\u003e 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend using our A2 Hardened Steel Nozzles \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLayer Height:\u003c\/span\u003e  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  L\u003cspan\u003eower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-03-26T17:33:48-04:00","created_at":"2020-03-26T17:33:48-04:00","vendor":"3DXTECH","type":"Filaments","tags":["1.75mm","3dxtech","3mm","750g","abs gf","abs gf-10","black","Fiber Reinforced","gf-10","gf10","glass composite 1.75mm","Special ABS 1.75mm"],"price":6495,"price_min":6495,"price_max":6495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32859344470147,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3DXMAX-FL-ABS-GF-1.75-750g-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":39743583846630,"product_id":4701190586499,"position":1,"created_at":"2023-08-08T23:07:11-04:00","updated_at":"2023-08-08T23:07:13-04:00","alt":"3DXMAX GF-10 ABS Filament - Black various sizes Digitmakers.ca","width":1269,"height":1280,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXMAX-GF-10-ABS-Filament-Black-various-sizes-Digitmakers-ca-5378.jpg?v=1691550433","variant_ids":[32859344470147]},"available":true,"name":"Fibrex ABS+GF Filament - 1.75mm 1kg Black","public_title":null,"options":["Default Title"],"price":6495,"weight":1500,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"44470147","featured_media":{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes Digitmakers.ca","id":32347713175782,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXMAX-GF-10-ABS-Filament-Black-various-sizes-Digitmakers-ca-5378.jpg?v=1691550433"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXMAX-GF-10-ABS-Filament-Black-various-sizes-Digitmakers-ca-5378.jpg?v=1691550433"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXMAX-GF-10-ABS-Filament-Black-various-sizes-Digitmakers-ca-5378.jpg?v=1691550433","options":["Title"],"media":[{"alt":"3DXMAX GF-10 ABS Filament - Black various sizes Digitmakers.ca","id":32347713175782,"position":1,"preview_image":{"aspect_ratio":0.991,"height":1280,"width":1269,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXMAX-GF-10-ABS-Filament-Black-various-sizes-Digitmakers-ca-5378.jpg?v=1691550433"},"aspect_ratio":0.991,"height":1280,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/3DXMAX-GF-10-ABS-Filament-Black-various-sizes-Digitmakers-ca-5378.jpg?v=1691550433","width":1269}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e3DXMAX® ABS-GF10 Glass Fiber Reinforced ABS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur glass fiber reinforced ABS is very stiff and strong allowing you to create structural parts without the lifting and warping that can happen with unfilled ABS.  We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM\/FFF process.  Glass fiber is very abrasive and we strongly recommend using our A2 Hardened Steel Nozzles when printing with glass fiber reinforced materials.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrint industrial-grade ABS parts with Gearbox™ HT2 High-Temp 3D Printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Attributes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for structural engineering-grade applications\u003c\/li\u003e\n\u003cli\u003eExceptionally stiff and strong - without being brittle\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage, warp, and lifting\u003c\/li\u003e\n\u003cli\u003eHigh thermal properties - up to 95\u003cspan\u003e°C\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ein-use applications depending on the mechanical loads applied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Print Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eExtruder:\u003c\/span\u003e  230-245°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Temp:\u003c\/span\u003e  95-110°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBed Prep: \u003c\/span\u003e PI Tape, PEI Tape, or ABS\/Acetone Slurry on clean glass works great for us.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHardened Nozzle:\u003c\/span\u003e 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend using our A2 Hardened Steel Nozzles \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLayer Height:\u003c\/span\u003e  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  L\u003cspan\u003eower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8058626955,"title":"High Performance HTPLA -Translucent Iridescent Ice 2.85 mm","handle":"high-performance-htpla-translucent-iridescent-ice-2-85-mm","description":"\u003ch1\u003eHTPLA out performs PLA, ABS, and Polyesters like PET!\u003c\/h1\u003e\n\u003cdiv id=\"full_description\" class=\"rte\"\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv\u003e\n\u003cstrong id=\"yui_3_17_2_8_1419892303855_3005\"\u003eProto-pasta's HTPLA v2.0 \u003c\/strong\u003eis better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is \"Hella Tough\" and can be \"Heat Treated\" for \"Higher Temperature\" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained.  This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHow do you \"Heat Treat\" for maximum performance? Bake your parts into a oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer time with less risk of unwanted deformation.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_51937\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2942\" class=\"sqs-block-content\"\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_298376\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_8_1419892303855_3003\" class=\"sqs-block-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e Iridescent Ice Color\u003c\/li\u003e\n\u003cli\u003e500g 8\" diameter spool only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo abrasive fillers so expect normal wear with standard nozzles.\u003c\/p\u003e\n\u003cp id=\"yui_3_17_2_8_1419892303855_3029\"\u003eIn our experience, good results were achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required.  Some shrinkage and distortion may occur in the annealing process, so larger or dimension critical parts may need to be scaled larger to compensate or printed in our more stable, lower shrink \u003cstrong\u003eCarbon Fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"828582148\"\u003e\u003c\/div\u003e\n","published_at":"2017-01-29T12:28:41-05:00","created_at":"2017-01-29T12:28:41-05:00","vendor":"ProtoPasta","type":"Filaments","tags":["2.85mm","3 mm","3D Printer Filament","3mm","Clear","Filament","HTPLA","Iridescent Ice","PLA","Special PLA 3mm \/ 2.85mm","Translucent","translucent filament"],"price":5499,"price_min":5499,"price_max":5499,"available":false,"price_varies":false,"compare_at_price":5499,"compare_at_price_min":5499,"compare_at_price_max":5499,"compare_at_price_varies":false,"variants":[{"id":26393932875,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRPS-FL-HTPLA-2.85-500G-IRDSCIC","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"High Performance HTPLA -Translucent Iridescent Ice 2.85 mm","public_title":null,"options":["Default Title"],"price":5499,"weight":700,"compare_at_price":5499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"640970862033","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/htpla2_grande_205643c0-da34-45ac-8d49-6d9fb621fcb1.jpg?v=1613452916"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/htpla2_grande_205643c0-da34-45ac-8d49-6d9fb621fcb1.jpg?v=1613452916","options":["Title"],"media":[{"alt":"High Performance HTPLA -Translucent Iridescent Ice 2.85 mm - Digitmakers.ca","id":94742970404,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/htpla2_grande_205643c0-da34-45ac-8d49-6d9fb621fcb1.jpg?v=1613452916"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/htpla2_grande_205643c0-da34-45ac-8d49-6d9fb621fcb1.jpg?v=1613452916","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eHTPLA out performs PLA, ABS, and Polyesters like PET!\u003c\/h1\u003e\n\u003cdiv id=\"full_description\" class=\"rte\"\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv\u003e\n\u003cstrong id=\"yui_3_17_2_8_1419892303855_3005\"\u003eProto-pasta's HTPLA v2.0 \u003c\/strong\u003eis better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is \"Hella Tough\" and can be \"Heat Treated\" for \"Higher Temperature\" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained.  This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHow do you \"Heat Treat\" for maximum performance? Bake your parts into a oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer time with less risk of unwanted deformation.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_51937\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2942\" class=\"sqs-block-content\"\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_298376\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_8_1419892303855_3003\" class=\"sqs-block-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e Iridescent Ice Color\u003c\/li\u003e\n\u003cli\u003e500g 8\" diameter spool only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo abrasive fillers so expect normal wear with standard nozzles.\u003c\/p\u003e\n\u003cp id=\"yui_3_17_2_8_1419892303855_3029\"\u003eIn our experience, good results were achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required.  Some shrinkage and distortion may occur in the annealing process, so larger or dimension critical parts may need to be scaled larger to compensate or printed in our more stable, lower shrink \u003cstrong\u003eCarbon Fiber\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-product-reviews\" data-id=\"828582148\"\u003e\u003c\/div\u003e\n"}